LS Mecapion Servo Drive APD-VS05N
Kami menjual Produk LS Mecapion Servo Drive APD-VS05N Yang Berkualitas Original Dengan harga yang bersaing Kebutuhan anda Kami Solusinya:
The LS Mecapion APD-VS05N is a 400W (often categorized as 0.4kW) AC servo drive within the versatile APD-VS series. It sits right in the “sweet spot” for many industrial applications, providing enough power for significant mechanical loads while maintaining the compact form factor of the VS series.
Technical Specifications
The “05” in the model number traditionally denotes the 400W–500W power class within the Mecapion naming convention.
Rated Output: 400W (0.4kW).
Input Power: Single or 3-Phase AC 200V ~ 230V, 50/60Hz.
Rated Current: ~2.6A to 2.8A.
Control Method: IGBT PWM Control, Sinusoidal Current Drive.
Speed Control Range: 1:5000.
Frequency Response: 400Hz or higher (velocity loop).
Key Features
Dynamic Performance: Excellent torque-to-inertia ratio, making it ideal for applications requiring frequent starts and stops.
Regenerative Braking: Unlike the smaller 100W/200W models, the VS05N often handles higher regenerative energy, making it more robust for vertical load applications (though an external resistor may still be required for high-duty cycles).
Internal Functions: Built-in “Homing” functions and multi-step speed control.
Reliability: High MTBF (Mean Time Between Failures) due to optimized heat dissipation.
Series Comparison
The VS05N is physically larger than the VS01N/02N to accommodate the larger power transistors and heat sinks required for 400W operation.
| Specification | APD-VS02N | APD-VS05N | APD-VSR5N |
| Power Output | 200W | 400W | 500W |
| Cooling Type | Natural Air | Natural/Forced Air | Forced Air (Fan) |
| Typical Motor | APM-S02A | APM-S04A / APM-SB04A | APM-SR5A |
Common Alarm Codes
When troubleshooting the APD-VS05N, the 7-segment display is your primary diagnostic tool:
AL-02 (Over Voltage): Usually occurs during rapid deceleration; indicates the need for a regeneration resistor.
AL-05 (Overload): The motor is drawing too much current for too long; check for mechanical jams or excessive friction.
AL-09 (Encoder Error): Check the CN2 cable connection or potential electrical noise interference.
Maintenance & Replacement
Since the APD-VS05N is a legacy product, parts are primarily found in the secondary or repair markets. If you are looking to modernize a system using this drive, the direct successor is the LS Electric L7SA004B.
Technical Specifications
The “05” in the model number traditionally denotes the 400W–500W power class within the Mecapion naming convention.
Rated Output: 400W (0.4kW).
Input Power: Single or 3-Phase AC 200V ~ 230V, 50/60Hz.
Rated Current: ~2.6A to 2.8A.
Control Method: IGBT PWM Control, Sinusoidal Current Drive.
Speed Control Range: 1:5000.
Frequency Response: 400Hz or higher (velocity loop).
Key Features
Dynamic Performance: Excellent torque-to-inertia ratio, making it ideal for applications requiring frequent starts and stops.
Regenerative Braking: Unlike the smaller 100W/200W models, the VS05N often handles higher regenerative energy, making it more robust for vertical load applications (though an external resistor may still be required for high-duty cycles).
Internal Functions: Built-in “Homing” functions and multi-step speed control.
Reliability: High MTBF (Mean Time Between Failures) due to optimized heat dissipation.
Series Comparison
The VS05N is physically larger than the VS01N/02N to accommodate the larger power transistors and heat sinks required for 400W operation.
| Specification | APD-VS02N | APD-VS05N | APD-VSR5N |
| Power Output | 200W | 400W | 500W |
| Cooling Type | Natural Air | Natural/Forced Air | Forced Air (Fan) |
| Typical Motor | APM-S02A | APM-S04A / APM-SB04A | APM-SR5A |
Common Alarm Codes
When troubleshooting the APD-VS05N, the 7-segment display is your primary diagnostic tool:
AL-02 (Over Voltage): Usually occurs during rapid deceleration; indicates the need for a regeneration resistor.
AL-05 (Overload): The motor is drawing too much current for too long; check for mechanical jams or excessive friction.
AL-09 (Encoder Error): Check the CN2 cable connection or potential electrical noise interference.
Maintenance & Replacement
Since the APD-VS05N is a legacy product, parts are primarily found in the secondary or repair markets. If you are looking to modernize a system using this drive, the direct successor is the LS Electric L7SA004B.
APD-VS370N
APD-VS300N
APD-VS220N
APD-VS150N
APD-VS110N
APD-VS75N
APD- VS50N
APD-VS35N
APD-VS20N
APD-VS15N
APD-VS10N
APD-VS05N
APD-VS04N
APD-VS02N
APD-VS01N
APD-VSR5N
Pesan Sekarang! Silahkan Hubungi Untuk informasi lebih jelas Sales Marketing kami
PT Adinata Jaya Teknik
Alamat: 18 OFFICE PARK BUILDING 12Th Floor Unit E
JL TB Simatupang No.18 RT 002 RW 001
KEL. Kebagusan KEC. Pasar Minggu
Jakarta Selatan
Telepon: 021 2127 5727
Email: info@adinatajayateknik.com