LS Mecapion Servo Drive APD-VS50N
Kami menjual Produk LS Mecapion Servo Drive APD- VS50N Yang Berkualitas Original Dengan harga yang bersaing Kebutuhan anda Kami Solusinya:
The LS Mecapion APD-VS50N is a 5.0kW (5000W) high-power AC servo drive. As one of the largest units in the APD-VS series, it is engineered for heavy industrial applications requiring immense torque and precise motion control, such as large gantry systems, heavy-duty metal forming, and high-capacity plastic injection molding machines.
Technical Specifications
The “50” in the model name indicates its 5.0kW power capacity. At this power level, the drive’s physical footprint and power requirements are significantly larger than the sub-1kW models.
Rated Output: 5.0kW (5000W).
Input Voltage: 3-Phase AC 200V ~ 230V (50/60Hz).
Rated Current: Approximately 28.0A – 30.0A.
Control Method: Sinusoidal PWM control using high-capacity IGBT modules.
Encoder Interface: Supports Incremental Encoders (standard 2048/2500/3000 PPR).
Cooling: Dual high-output forced-air fans for maximum heat dissipation.
Power Stage & Wiring
Main Power (L1, L2, L3): Requires a dedicated 3-phase supply. Because of the 5kW draw, high-gauge wiring and appropriate circuit breakers are mandatory.
Motor Terminals (U, V, W): Heavy-duty screw terminals to accommodate the thick power cables for motors like the APM-S50A or SC50A.
Regenerative Braking (P, B): At 5.0kW, handling decelerating inertia is critical. An external braking resistor is effectively mandatory to prevent DC bus overvoltage (AL-04).
Performance in Large Systems
High Inertia Handling: Optimized for driving heavy mechanical loads while maintaining a high velocity-loop response (approx. 400Hz).
Advanced Notch Filters: Includes up to two adaptive notch filters to suppress low-frequency resonance often found in large, heavy machine frames.
Protection: Comprehensive thermal monitoring of both the drive’s power modules and the connected motor.
Series Comparison: High-Power Models
| Specification | APD-VS20N | APD-VS35N | APD-VS50N |
| Power Output | 2.0kW | 3.5kW | 5.0kW |
| Rated Current | ~12.5A | ~20.0A | ~28.5A |
| Cooling | Single Fan | Dual Fans | Dual Fans |
| Weight | ~2.5kg | ~5.0kg | ~8.0kg+ |
Troubleshooting & Lifecycle
Maintenance: Given the high current flow, terminal connections should be checked periodically for tightness to prevent arcing or localized heating.
Common Alarm AL-06 (Overload): Frequently occurs if the acceleration/deceleration ramps are too steep for the mechanical load’s inertia.
Legacy Replacement: The APD-VS50N is a legacy model. For modern upgrades, the LS Electric L7 Series (e.g., L7SA050B) is the standard replacement. Note that modern 5kW systems often use high-resolution serial encoders, which may necessitate replacing both the drive and the motor.
APD-VS370N
APD-VS300N
APD-VS220N
APD-VS150N
APD-VS110N
APD-VS75N
APD- VS50N
APD-VS35N
APD-VS20N
APD-VS15N
APD-VS10N
APD-VS05N
APD-VS04N
APD-VS02N
APD-VS01N
APD-VSR5N
Pesan Sekarang! Silahkan Hubungi Untuk informasi lebih jelas Sales Marketing kami
PT Adinata Jaya Teknik
Alamat: 18 OFFICE PARK BUILDING 12Th Floor Unit E
JL TB Simatupang No.18 RT 002 RW 001
KEL. Kebagusan KEC. Pasar Minggu
Jakarta Selatan
Telepon: 021 2127 5727
Email: info@adinatajayateknik.com